The pneumatic and mechanopneumatic single-point sampler is designed to take grain samples from freight vehicles pneumatically or mechanopneumatically, based on the injection of loose grain mass by air flow. The sampler is installed on grain terminals and currents in the immediate vicinity of the laboratory.
The sampler matches design requirements technological documentation and related technical conditions is made 1 category according to GOST 15150 in the climatic performance “U”.
|NAME OF PARAMETERS||DATA|
|Throughput, cycle/h, not less||60|
|Sample volume, l||2|
|Departure of an arrow of the manipulator, m||5.5|
|The course of the telescopic section, m||1.5|
|Range of supply of the sample through the pipeline, m||up to 15|
|Depth of the massif of grain, m, to||2|
|The angle of rotation of the arrow in the horizon, degrees||+/- 90|
|The angle of rotation of the arrow vertically, degrees||45|
|Installed power, kW||5.9|
|Drives for boom turns and telescopic extension||mechanical|
|Overall dimensions: length, mm||5000|